034 Motorsport - Density Line Control Arm Kit - Audi C8/D5/4M - A6/A7/Q7/Q8/S6/RS6/S7/RS7 - 034-401-1082.
Fits Audi C8/D5/4M chassis with various models, check the fitment information. This is the full UPPER & LOWER control arm kit.
034Motorsport Density Line Lower Control Arm Kits with Density Line Non-Adjustable Upper Control Arms are the ultimate upgrade and replacement solution for your Audi!
Replace your vehicle's aging, worn control arms with these performance-engineered Density Line units to restore feel and improve handling precision beyond factory levels. These kits include four upper control arms, four lower control arms, two new ball joints, and all necessary hardware for installation.
034Motorsport's complete Density Line Control Arm Kit with Upper Adjustable or Non-Adjustable Control Arms are designed to be performance replacements for all eight of the factory front upper and lower control arms. The result is tighter handling and more precise steering response than even brand new factory control arms can offer. In addition, adjustable upper control arms allow optimal alignment for your lowered or track driven vehicle.
The factory front control arms are an integral part of the suspension, but can start wearing out as early as 40,000 miles - even on vehicles that see mainly highway commuting miles, trips to the local mall, and school drop-off/pick-up. As the rubber bushings degrade and ball joints develop play, alignment is compromised, and steering becomes less precise. This kit is a drop-in replacement with feature improvements over stock, that will tighten up front-end feel and allow camber adjustment to significantly improve handling.
Density Line Non-Adjustable Control Arms:
034Motorsport's complete Density Line Upper Control Arms are designed to be a performance replacement for all four factory front upper control arms. Featuring high-durometer rubber bushings and high-quality ball joints, Density Line Control Arms are engineered to limit unwanted deflection in the suspension, resulting in tighter handling and more precise steering response than even brand-new factory control arms can offer.
Features:
Density Line Non-Adjustable:
- Complete, Drop-In Replacement for Factory Upper Control Arms
- Offers Improved Handling Feel & Steering Precision
- High-Durometer Rubber Bushings (65 - 70 Durometer)
- No Fluid, So Unlike OE Arms, the Bushings Cannot Leak
- Includes New Hardware & Ball Joints
WHAT’S INCLUDED:
-
Front Lower Control Arms - Front (Left & Right)
-
Front Lower Control Arms - Rear (Left & Right)
-
Front Upper Control Arms - Front (Left & Right)
-
Front Upper Control Arms - Rear (Left & Right)
- Installation Hardware Kit
OE PART INTERCHANGE:
Upper Arms:
- Control Arm, Upper Front Left: 4M0 407 505 B
- Control Arm, Upper Front Right: 4M0 407 506 B
- Control Arm, Upper Rear Left: 4M0 407 509 B
- Control Arm, Upper Rear Right: 4M0 407 510 B
-
Control Arm, Lower Front Left: 4M0 407 151 L
-
Control Arm, Lower Front Right: 4M0 407 152 L
-
Control Arm, Lower Rear Left: 4M0 407 693 F
-
Control Arm, Lower Rear Right: 4M0 407 694 F
-
Ball Joint Front Right and Left: 4M0 407 689 C
Installation Note:
It is imperative that the suspension be compressed to static ride height before any suspension pivot bushings are tightened, as per the factory installation procedure. If this is not done, the bushings will tear prematurely as the twisting forces on them will be much higher than is intended. 034Motorsport's Limited Warranty on Density Line products does not cover premature failure due to improper installation or use. We highly recommend professional installation for this product.
Fitment:
Make |
Model |
Years |
Chassis |
Engine |
Audi |
A6 |
2019-Present |
C8 |
2.0 TFSI |
Audi |
A6 |
2019-Present |
C8 |
3.0 TFSI |
Audi |
A7 |
2019-Present |
C8 |
3.0 TFSI |
Audi |
A8 |
2019-Present |
D5 |
3.0 TFSI |
Audi |
Allroad |
2019-Present |
C8 |
3.0 TFSI |
Audi |
e-tron |
2019-2023 |
4M.5 |
e-tron |
Audi |
Q7 |
2015-Present |
4M/4M.5 |
2.0 TFSI |
Audi |
Q7 |
2015-Present |
4M/4M.5 |
3.0 TFSI |
Audi |
Q8 |
2019-Present |
4M8 |
3.0 TFSI |
Audi |
Q8 |
2018-Present |
4M8 |
e-tron |
Audi |
RS6 |
2020-Present |
C8 |
4.0 TFSI |
Audi |
RS7 |
2019-Present |
C8 |
4.0 TFSI |
Audi |
RSQ8 |
2020-Present |
4M8 |
4.0 TFSI |
Audi |
S6 |
2019-Present |
C8 |
2.9 TFSI |
Audi |
S7 |
2019-Present |
C8 |
2.9 TFSI |
Audi |
S8 |
2019-Present |
D5 |
4.0 TFSI |
Audi |
SQ7 |
2020-Present |
4M/4M.5 |
4.0 TFSI |
Audi |
SQ8 |
2020-Present |
4M8 |
4.0 TFSI |
Did you know VAGPARTS Australia has a trade program? Sign up for exclusive trade pricing and discounts on Volkswagen & Audi Parts. If you are a mechanic, tuner or have an automotive business this program is for you!
Our trade only pricing is typically 30% lower than dealer trade prices. Our exclusive trade pricing is hard to beat!
You will receive exclusive industry discount, priority customer service, help with parts interpretation and you can drop ship to your customers if you wish to resell our items. We have access to millions of SKU's and can source anything for you.
Trade only discounted pricing
Premium & Express shipping only
Priority fulfilment
Dedicated parts specialist support
Free listing in our trade directory
Drop shipping enabled
Custom Part support - send us your part number we will source it
FREE SHIPPING over $50 or $12.95
Help to source hard to find products
Trade portal (password protected)
Access to 034 Motorsport at trade pricing
This is a great service for the astute workshop owner who wishes to purchase high grade parts at competitive prices.
We express ship ONLY – every single working day from our Western Sydney warehouse.
Join the trade program today!