034 Motorsport Australia - DL501 DSG Tuning - Audi A7 C7 3.0 TFSI - Supercharged.
Tune your DL501 DSG gearbox from home or on the go with '034SPI' Mobile app.
034 Motorsport is proud to offer Performance DSG Software for Audi 3.0 V6 3.0 TFSI models equipped with the DL501 7-Speed S-tronic transmission!
Founded in 2005, 034 Motorsport produces motorsport quality parts and software tuning solutions for Audi and Volkswagen vehicles. Passion for innovation, performance and quality is the core of the company.
Flashed directly through your vehicle’s OBD2 port, 034 Motorsport’s proprietary calibrations for the DL501 TCU safely and effectively
raise the factory transmission's RPM limiter
increase shift speed
optimise the shift points in Drive and Sport modes for better performance and driveability.
The result is a noticeable improvement in acceleration with smooth as butter shifts without any sacrifice in comfort or reliability.
034 Motorsport's DL501 Performance Software was developed entirely in-house on 034 Motorsport's Development B8 Audi S4. A huge amount of time has gone into testing with continual new features released.
034 Motorsport software is the most developed and feature rich product for this gearbox on the market.
Lets get you flash tuning
In addition, End User Flashing allows Dynamic+ Performance Software customers to receive and install software updates and revisions, flash back to stock, or upgrade to the next stage of performance software for their vehicle.
With the DL501 DSG tune you raise the factory transmission's RPM limiter, increasing the available powerband and allowing your car to make use of Stage 1/2 Performance Software.
PERFORMANCE DSG SOFTWARE FEATURES
Raised RPM Limit for Use with Stage 1/2 Performance Software
Raised Launch Control Counter Limit (From Factory 200)
Flashed Directly Via the Factory OBD-II Port - No TCU Removal Needed!
034 MOTORSPORT DL501 PERFORMANCE DSG SOFTWARE
STOCK TCU
034MOTORSPORT
RPM Limit
6,500 RPM to 7,000 RPM
7,200 RPM
Launch Control RPM**
Single Point - ~3,000 RPM
Multiple hold points, typically 2,500/3,000, however we can tailor as needed for traction/setup.
Launch Control Counter Limit**
200
2,000
Manual Mode Auto Downshift
Enabled
Disabled
Shift Speed
Fast
Faster
Shift Points
Good
Better
**Some of the factory DSG controller software has all launch control software removed, in these cases we can sometimes alter the software of your TCU to a launch control enabled version, however we cannot guarantee that we will be able to do this with _all_ versions of the factory controllers. This has been the case on some exchange/replacement units, as well as some European B8.5 models. If you do not have factory launch control in any way please contact us to determine if we can enable this for you.
Make
Model
Years
Chassis
Engine
Audi
S4
2009-2017
B8/B8.5
3.0 TFSI Supercharged
Audi
S5
2009-2017
B8.5
3.0 TFSI Supercharged
Used in Audi models with Quattro S4/S5/RS5/S6/S7 from 2009-2017. B9 moves to 8 speed.
Make
Model
Year
Engine
Audi
S4
B8 (09-17)
3.0T
Audi
S5
B8 (09-17)
3.0T
Audi
A6
C7 (12-15)
3.0T
Audi
A6
C7.5 (16-19)
3.0T
Audi
A7
C7 (11-15)
3.0T
Audi
A7
C7.5 (16-18)
3.0T
Audi
Q5
8R (09-17)
3.0T
The DL501 has 3 Generations
Gen 1 is 2010-2011
Gen 1.5 is 2012
Gen 2 is 2013+
Does not fit 2.0 TFSI and 3.0 TDI models. Only designed for 3.0T.
How to use the end user flash cable & software
Receive welcome email(after purchase) with 034 software account and user guide
Plug into OBD2 port and USB port on laptop & take read of stock ECU / TCU
Send 034 stock file details from software (very easy)
Plug back into OB2 port & USB and flash tune your ECU / TCU
Once you have taken the stock read of the ECU you can always flash your car back to stock at any time. You can also flash between stages.
The reading / flashing and software process isnot complicated. Everything is straight forward and anyone who has the computer skills to send an email can do this process.
Initial read time - 10 minutes First flash time - 10 minutes Flash back to stock - 5 minutes Flashing between files and stages - 5 minutes
Q: What happens after I order my tuning cable and software?
A: We will EXPRESS post the cable and start a tuning order for you.
How long do I have to wait to receive my tuning download link and username?
From the minute your order is processed on the VAGParts website, you can expect a 1-3 business day fulfillment time to receive your download links and username from the 034 Motorsport tuning team. Please be on the lookout for this email, which will come from the email address "tuning@034motorsport.com"
Q: What is in the introductory email?
A: This is an email from 034Motorsport which includes the username for your account, a link to download the flashing software and the Getting Started user manual.
Q: I haven't got my introductory email
A: You may have to wait 1-3 business days to receive this email from the 034Motorsport team. Please also check your spam, updates, and other email tabs for the email from 034Motorsport. If it still hasn't come after a couple of days please contact VAGPARTS. Please note weekends are not working days.
Q: What do I need to tune my vehicle with a laptop?
A: Windows 10/11 laptop, strong/stable internet connection, Dynamic+ flashing cable, a 20-amp battery supply charger/maintaner, and tuning account access.
I have everything I need what do I do next?
Please download the 034 flashing client if you haven't already, and review the Getting Started guide. You'll need to register your username on 034 Motorsport's server, by inputting your username/email address in the applicable field, and clicking the "Forgot/Reset Password" link. This will send an email to you that will allow you to set your own password, which you'll need to use to log into the flashing client software. Once you are logged into the flashing client, please click on the controller that you wish to program (either ECU - engine, or TCU - transmission) and proceed through the steps listed in the "Getting Started" guide to flash that controller. The files labeled "Stock" are completely OEM software calibrations, as you would have received from the factory, so please only flash these if you wish to go back to stock tuning.
I received an error message stating that "No products are available for this controller", what do I do?
If you receive the error message "No products are available for this controller", please email tuning@034motorsport.com directly, and someone from their tuning support team will advise you on the steps that they will take to get you access to the files that were purchased.
A: This is NOT a difficult process. If you have the ability to open and email and send an email, this is the same level of computer literacy needed.
Q: How long does the flashing process take?
A: The total time to tune the car is around 30 mins. Flashing between files, upgrading and so on once you have done the first installation is a couple of minutes.
I need some technical support. Who do I contact?
Please email tuning@034motorsport.com and a dedicated tuning support representative will help address any concerns or questions you may have.
Q: My car already has a tune on it, how do I remove it?
A: You may need to flash your car back to stock. You can do this by flashing the car to stock using the 034Motorsport flashing portal.
Q: Do I have to flash my ECU and TCU?
A: Yes, these are separate control units and need to be individually flashed.
Q: What is 91 AKI and 93 AKI? RON to AKI?
A: 91AKI is 95 RON and 93 AKI is 98 RON. When flashing select the file appropriate to the fuel octane you are using.
Q: How long do I have to wait for my tuning introductory email?
A: 48 hours or 2 working days
Q: How long do I have for wait for my tuning files?
A: Please allow 72 hours or 3 working days for fulfilment
Q: What is the normal turn around for the entire process?
A: Please allow up to 4 working days
Mobile APP Tuning (034SPI)
Flash tune your vehicle with any mobile or tablet device of your choice!
What device can I use to flash tune my car?
Android auto phone or tablet
Apple phone, tablet or Apple Silicon-equipped laptops (M1, M2, M3).
1. Download your "getting started" flashing user guide 2. Download the "Dynamic+ flash tuning" software 3. Register your user name and password (from tuning introductory email) 4. Sign in to the "Dynamic Flash" software
What's Next?
Plug into your vehicles OBD II port with the 034 flash cable
Open the 034 tuning software
Identify your stock ECU and TCU software box code - upload this via the 034 software
Select your ECU calibration and flash tune your ECU and then TCU
Times for Delivery
From website order to tune introductory email - 48 Hours
From uploaded stock files to order fulfilment - 72 Hours
Normal maximum total time - 4 Business days
What if a file isnt ready yet?
Please contact tuning@034motorsport.com to let them know that a file was not available for your vehicle. A new file will be created and uploaded to the server for you ready for flashing - usually within 72 hours or 3 working days.
My tuning files are ready
The reading / flashing and software process is not complicated. Everything is straight forward and anyone who has the computer skills to send an email can do this process.
Initial read time - 10 minutes First flash time - 20 minutes Flash back to stock - 10 minutes Upgrading files (stage 1 to 2) - 5 minutes
Please run through the user manual and install your ECU file and or TCU files and if for some reason you run into any unexpected issues please email tuning@034motorsport.com
Fuel Ratings
Please note American fuel types use a different fuel rating system AKI.
034Motorsport's Dynamic+ Performance Software provides reliable horsepower and torque increases through driver-centric calibrations that elevate driving enjoyment and precision. The Dynamic+ Tuning Philosophy emphasizes safety and reliability, with the goal of optimizing power delivery without compromising the longevity of the engine and related components.
Developed entirely in-house by 034Motorsport's engineers, Dynamic+ calibrations are the result of countless hours of dyno development and real-world track testing with multiple vehicles and varying environments.
OBD Port Tuning
Dynamic+ Performance Software is loaded directly to your factory Engine Control Unit (ECU) via the factory On-Board Diagnostic (OBD) port using 034Motorsport's Proprietary Dynamic+ Tuning Suite, unlocking more power, more torque, and quicker acceleration! No physical access or modification to the ECU is required, and it can be reverted to the original factory software at any time.
Skip to content
