034 Motorsport Australia - TrackSport Engine Mount Pair, C7/C7.5 Audi S6/S7/RS7 and D4 A8/S8 4.0T - 034-509-0083.
The 034Motorsport Motorsport Tracksport Engine Mount Pair for the C7/C7.5 Audi S6/S7/RS7 and D4 A8/S8 with the 4.0T are the new standard in ultra-high performance mount solutions. These mounts are designed with extreme performance in mind, manufactured from billet aluminum and high-durometer Density Line rubber, making them virtually indestructible, while maintaining better ride characteristics than polyurethane alternatives, and are meant for applications which see loads beyond what the factory cast aluminum engine mount housings can tolerate. These mounts have a lifetime guarantee regardless of power level applied and type of track racing they are used for.
Please Note: Motorsport Mounts do not feature Active Mount Emulators. If your vehicle is equipped with Active Engine Mounts from the factory, you will need to add Active Engine Mount Resistor Bypasses to avoid a MIL.
The 034Motorsport Motorsport Tracksport Engine Mount Pair for the C7/C7.5 Audi S6/S7/RS7 and D4 A8/S8 with the 4.0T are the new standard in ultra-high performance mount solutions. These mounts are designed with extreme performance in mind, manufactured from billet aluminum and high-durometer Density Line rubber, making them virtually indestructible, while maintaining better ride characteristics than polyurethane alternatives, and are meant for applications which see loads beyond what the factory cast aluminum engine mount housings can tolerate. These mounts have a lifetime guarantee regardless of power level applied and type of track racing they are used for.
Motorsport Mounts are void-free and fluid-free, eliminating the slop associated with the factory engine/transmission mounts, drastically reducing slop from the factory mounting system to improve launches, throttle response, and shift quality. These extreme-duty mounts will increase noise, vibration, and harshness (NVH) transfer into the cabin, as they are designed to drastically reduce engine movement compared to the factory parts. The 034Motorsport Motorsport Tracksport Engine Mount Pair utilizes a dual bushing design. This allows the motor mounts to evenly distribute high load across the mount for long term reliability and maximum performance capability.
HIGH-DUROMETER RUBBER VS. POLYURETHANE:
Density Line Mounts are manufactured from high-durometer rubber instead of polyurethane for a number of reasons. While vulcanized rubber mounts are more expensive to prototype due to increased complexity of manufacturing and high initial tooling costs, rubber is inherently better than polyurethane as a damping medium for mounts and bushings.
Rubber is able to deal with stress under both tension and compression, while polyurethane mounts rely on the damping medium to be effective only under compression. Rubber is also excellent in shear, where polyurethane is ineffective, making it ideal for applications that apply a shear force to the bushing during articulation. Rubber does not pack and wear like polyurethane does, which ultimately results in a long-lasting part with consistent performance.
Features:
- Manufactured from Billet Aluminum & High-Durometer Density Line Rubber
- Anodized for Durability and Long Lasting Good Looks
- Reduced Drivetrain Slop
- Decreased Engine Movement Under Load
- More Direct Power Transfer
- Improved Shifting Feel
- Harder Launches
- Improved Strength & Durability from Cast Factory Engine Mounts
- Complete Drop-In Replacement of Factory Engine Mounts
- Sold in Pairs
- Active Mount Resistor Bypasses Sold Separately!
OE Part Interchange:
- 4H0 199 255 T
- 4H0 199 256 T
- 4H0 199 383 B
- 4H0 199 384 B
Warranty:
- Limited Lifetime Replacement Warranty against failure from manufacturing defects. (Applicable to the original purchaser only. If any part of the mount fails under normal use, upon 034Motorsport approval, replacement part(s) will be shipped at no charge to the customer for installation.)
Fitment:
| Make |
Model |
Years |
Chassis |
Engine |
| Audi |
A8 |
2011-2018 |
D4 |
4.2L FSI |
| Audi |
RS6 |
2012-2018 |
C7/C7.5 |
4.0 TFSI |
| Audi |
RS7 |
2012-2018 |
C7/C7.5 |
4.0 TFSI |
| Audi |
S6 |
2012-2018 |
C7/C7.5 |
4.0 TFSI |
| Audi |
S7 |
2012-2018 |
C7/C7.5 |
4.0 TFSI |
| Audi |
S8 |
2011-2018 |
D4 |
4.0L TFSI |
The installation of your Motorsport TrackSport Engine Mount Pair, C7/C7.5 Audi S6/S7/RS7 and D4 A8/S8 4.0T is a straightforward process that will take approximately 6 hours to complete. You can access our detailed installation guide by clicking the link below.
Download the Motorsport TrackSport Engine Mount Pair, C7/C7.5 Audi S6/S7/RS7 and D4 A8/S8 4.0T Install Guide
Associated product: 034 Motorsport - Resistor Bypass, Active Motor Mount, EA839 V6 Engines (2.9T/3.0T) & EA824 V8 Engines (4.0T)
Did you know VAGPARTS Australia has a trade program? Sign up for exclusive trade pricing and discounts on Volkswagen & Audi Parts. If you are a mechanic, tuner or have an automotive business this program is for you!
Our trade only pricing is typically 30% lower than dealer trade prices. Our exclusive trade pricing is hard to beat!
You will receive exclusive industry discount, priority customer service, help with parts interpretation and you can drop ship to your customers if you wish to resell our items. We have access to millions of SKU's and can source anything for you.
Trade only discounted pricing
Premium & Express shipping only
Priority fulfilment
Dedicated parts specialist support
Free listing in our trade directory
Drop shipping enabled
Custom Part support - send us your part number we will source it
FREE SHIPPING over $50 or $12.95
Help to source hard to find products
Trade portal (password protected)
Access to 034 Motorsport at trade pricing
This is a great service for the astute workshop owner who wishes to purchase high grade parts at competitive prices.
We express ship ONLY – every single working day from our Western Sydney warehouse.
Join the trade program today!
Skip to content
Replace