034 Motorsport - DQ250 DSG Tuning - Audi S3 8P GEN 2.
Flash tune your DSG from home or on the go with '034SPI' Mobile app.
Fits Audi S3 8P Gen 2 from 2009-2013.
034 Motorsport is proud to offer Dynamic+ performance DSG tuning software upgrades for your Audi S3 8P GEN 2.
Founded in 2005, 034 Motorsport produces motorsport quality parts and software tuning solutions for Audi and Volkswagen vehicles. Passion for innovation, performance and quality is the core of the company.
Shift smoother and faster
To extract the full potential of your ECU tune and hardware modifications transmission software is required. An optimised calibration will decrease shift times, raise engine RPM limiter, improve general drivability, optimise launch control and increase acceleration.
Manage your hardware
When gearbox clutch clamping pressures are not managed correctly, it can put increased strain on the transmission leading to premature wear. Increasing clutch pressure leads to less clutch slip. This enables the gearbox to handle the increased torque from software remapping.
Transform your drive
By decreasing the time to shift less power is lost during changes. This leads to a faster car, rapid acceleration and an enhanced driving experience.
Flash from home, its easy!
034 Motorsport offer flashing capabilities on multiple devices. Calibrate your vehicle with Windows PC, or the 034SPI Dynamic+ Smartphone Interface for MacOS, iOS mobile devices, and Android devices. Both programs have the same flashing capabilities, but 034SPI allows you to flash tunes wirelessly using the Dynamic+ Flashing Dongle and your mobile device, change fuel maps on the fly, configure live data displays, record and submit data logs to 034Motorsport's Tuning Support team, and utilize diagnostic support tools such as DTC/CEL code read/clear, and more!
We recommend you pair 034 Motorsport DSG tunes with 034 ECU tunes, but it is not mandatory. If you are already tuned and just want to improve your gearbox performance that is a great and cost effective solution.
How to use the end user flash cable & software
Receive welcome email(after purchase) with 034 software account and user guide
Plug into OBD2 port and USB port on laptop & take read of stock ECU / TCU
Send 034 stock file details from software (very easy)
Plug back into OB2 port & USB and flash tune your ECU / TCU
Once you have taken the stock read of the ECU you can always flash your car back to stock at any time. You can also flash between stages.
The reading / flashing and software process isnot complicated. Everything is straight forward and anyone who has the computer skills to send an email can do this process.
Initial read time - 10 minutes First flash time - 10 minutes Flash back to stock - 5 minutes Flashing between files and stages - 5 minutes
Q: What happens after I order my tuning cable and software?
A: We will EXPRESS post the cable and start a tuning order for you.
How long do I have to wait to receive my tuning download link and username?
From the minute your order is processed on the VAGParts website, you can expect a 1-3 business day fulfillment time to receive your download links and username from the 034 Motorsport tuning team. Please be on the lookout for this email, which will come from the email address "tuning@034motorsport.com"
Q: What is in the introductory email?
A: This is an email from 034Motorsport which includes the username for your account, a link to download the flashing software and the Getting Started user manual.
Q: I haven't got my introductory email
A: You may have to wait 1-3 business days to receive this email from the 034Motorsport team. Please also check your spam, updates, and other email tabs for the email from 034Motorsport. If it still hasn't come after a couple of days please contact VAGPARTS. Please note weekends are not working days.
Q: What do I need to tune my vehicle with a laptop?
A: Windows 10/11 laptop, strong/stable internet connection, Dynamic+ flashing cable, a 20-amp battery supply charger/maintaner, and tuning account access.
I have everything I need what do I do next?
Please download the 034 flashing client if you haven't already, and review the Getting Started guide. You'll need to register your username on 034 Motorsport's server, by inputting your username/email address in the applicable field, and clicking the "Forgot/Reset Password" link. This will send an email to you that will allow you to set your own password, which you'll need to use to log into the flashing client software. Once you are logged into the flashing client, please click on the controller that you wish to program (either ECU - engine, or TCU - transmission) and proceed through the steps listed in the "Getting Started" guide to flash that controller. The files labeled "Stock" are completely OEM software calibrations, as you would have received from the factory, so please only flash these if you wish to go back to stock tuning.
I received an error message stating that "No products are available for this controller", what do I do?
If you receive the error message "No products are available for this controller", please email tuning@034motorsport.com directly, and someone from their tuning support team will advise you on the steps that they will take to get you access to the files that were purchased.
A: This is NOT a difficult process. If you have the ability to open and email and send an email, this is the same level of computer literacy needed.
Q: How long does the flashing process take?
A: The total time to tune the car is around 30 mins. Flashing between files, upgrading and so on once you have done the first installation is a couple of minutes.
I need some technical support. Who do I contact?
Please email tuning@034motorsport.com and a dedicated tuning support representative will help address any concerns or questions you may have.
Q: My car already has a tune on it, how do I remove it?
A: You may need to flash your car back to stock. You can do this by flashing the car to stock using the 034Motorsport flashing portal.
Q: Do I have to flash my ECU and TCU?
A: Yes, these are separate control units and need to be individually flashed.
Q: What is 91 AKI and 93 AKI? RON to AKI?
A: 91AKI is 95 RON and 93 AKI is 98 RON. When flashing select the file appropriate to the fuel octane you are using.
Q: How long do I have to wait for my tuning introductory email?
A: 48 hours or 2 working days
Q: How long do I have for wait for my tuning files?
A: Please allow 72 hours or 3 working days for fulfilment
Q: What is the normal turn around for the entire process?
A: Please allow up to 4 working days
Mobile APP Tuning (034SPI)
Flash tune your vehicle with any mobile or tablet device of your choice!
What device can I use to flash tune my car?
Android auto phone or tablet
Apple phone, tablet or Apple Silicon-equipped laptops (M1, M2, M3).
1. Download your "getting started" flashing user guide 2. Download the "Dynamic+ flash tuning" software 3. Register your user name and password (from tuning introductory email) 4. Sign in to the "Dynamic Flash" software
What's Next?
Plug into your vehicles OBD II port with the 034 flash cable
Open the 034 tuning software
Identify your stock ECU and TCU software box code - upload this via the 034 software
Select your ECU calibration and flash tune your ECU and then TCU
Times for Delivery
From website order to tune introductory email - 48 Hours
From uploaded stock files to order fulfilment - 72 Hours
Normal maximum total time - 4 Business days
What if a file isnt ready yet?
Please contact tuning@034motorsport.com to let them know that a file was not available for your vehicle. A new file will be created and uploaded to the server for you ready for flashing - usually within 72 hours or 3 working days.
My tuning files are ready
The reading / flashing and software process is not complicated. Everything is straight forward and anyone who has the computer skills to send an email can do this process.
Initial read time - 10 minutes First flash time - 20 minutes Flash back to stock - 10 minutes Upgrading files (stage 1 to 2) - 5 minutes
Please run through the user manual and install your ECU file and or TCU files and if for some reason you run into any unexpected issues please email tuning@034motorsport.com
Fuel Ratings
Please note American fuel types use a different fuel rating system AKI.
034Motorsport's Dynamic+ Performance Software provides reliable horsepower and torque increases through driver-centric calibrations that elevate driving enjoyment and precision. The Dynamic+ Tuning Philosophy emphasizes safety and reliability, with the goal of optimizing power delivery without compromising the longevity of the engine and related components.
Developed entirely in-house by 034Motorsport's engineers, Dynamic+ calibrations are the result of countless hours of dyno development and real-world track testing with multiple vehicles and varying environments.
OBD Port Tuning
Dynamic+ Performance Software is loaded directly to your factory Engine Control Unit (ECU) via the factory On-Board Diagnostic (OBD) port using 034Motorsport's Proprietary Dynamic+ Tuning Suite, unlocking more power, more torque, and quicker acceleration! No physical access or modification to the ECU is required, and it can be reverted to the original factory software at any time.
Skip to content
